特点与用途
● Miniature load cell, low profile, small deflection
● Made of stainless steel
● Tension and compression application
● Mainly used for tension and compression force testing for raw
material and other industrial testing and control system
● High dynamic response frequency
● 高度低,变形量小
● 不锈钢材料
● 拉压双向
● 主要用于材料拉伸及挤压力的测量及其他工业测试、测量及控制系统
● 动态响应频率高
量程
φ5mm-φ28mm
技术参数
| Rated Output | 输出灵敏度 | 1.0mV/V |
Zero Balance | 零点输出 | ±1%F.S. |
Non-linearity | 非线性 | 0.1%F.S. |
Hysteresis | 滞后 | 0.1%F.S. |
Repeatability | 重复性 | 0.1%F.S. |
Creep after 30 minutes | 蠕变(30分钟) | 0.1%F.S. |
Temp.effect on output | 温度灵敏度漂移 | 0.05%F.S./10℃ |
Temp.effect on zero | 零点温度漂移 | 0.05%F.S./10℃ |
Input Impedance | 输入阻抗 | 350±20Ω |
Output Impedance | 输出阻抗 | 350±5Ω |
Insulation Resistance | 绝缘阻抗 | ≥5000MΩ/100VDC |
Recommended Excitation | 推荐激励电压 | 5-10V |
Maximum Excitation | 最大激励电压 | 15V |
Compensated Temp.Range | 温度补偿范围 | -10℃~60℃ |
Operation Temp.Range | 工作温度范围 | -30℃~85℃ |
Safe Overload | 安全超载 | 150%F.S. |
Ultimate overload | 极限超载 | 200%F.S. |
Cable Size | 电缆线尺寸 | 4X4000mm |
Protection Class | 防护等级 | IP66 |
尺寸图
